PG-9083
2000Mbps Powerline Ethernet Adapter
-
產品概述
產品說明
The PowerGrid 9083, ITU-T G.hn networking standard compliant Ethernet adapter, provides the best quality data transmission for truly high-speed ‘connected home’ experience. It allows users to extend a local area network via existing power lines, eliminating the need for extra wiring. Installation at home (or in a small office) is quick and easy as the PowerGrid 9083 comes with plug-and-play technology.
The PowerGrid 9083 supports the new generation of so-called G.hn wave2 tech, 100MHz MIMO operation with an AC filter female power socket and can be used with two fully programmable reception and transmission paths to attain up to 1.2Gps PHY over powerline. The PowerGrid 9083 comes pre-configured for easy installation / configuration, and it features the most secure end-to-end encryption algorithms for safeguarding the network integrity, with advanced energy-saving features based on Ethernet link activity; automatic standby mode.
產品特色
產品特色
- MIMO Performance
Supports ITU-T G.hn baseband plans 50 and 100 MHz and MIMO techniques for powerline (based on G.9963) boosting PLC throughput up to 1.2Gbps PHY rate over powerline and having Robust Communication Mode (RCM) to prevent noise interference from other home appliances. - High Speed Data Transmission
High speed (around max 1000 Mbps) dramatically increases the performance of next-generation home entertainment applications such as multiple high definition (HD) TV over IP (IPTV), 3D TV and VoIP, digital video recorder (DVR) networking and media center PCs. - No Extra Wires Needed
The local area network can be extended without the hassle of having to install extra wiring because the power line network is already a commonplace fixture in most households. - Simple Pairing, Plug & Play
Quick and easy connections with embedded plug-and-play, no extra configuration required! PowerGrid 9083 can be paired easily by simply connecting Ethernet cables to routers and devices. - Extends Connecting Range & Eliminates Dead Spots
Unlike wireless, Power line technology is capable of actually covering more than 95% of a typical household area. - More Outlets than Other Wired Solutions
On average, there are 45 power outlets and only 3-5 cable or phone outlets in a household, therefore making power lines a more convenient solution for extending networks. - Security
With advanced data encryption capability, the power line networks are safer and more secure.
產品規格
產品規格
Interface:
- RJ-45 X 1 for Ethernet connection
- AC power plug X 1
- AC power socket X 1
- LED Indicators: G.hn, LAN, PWR, Security
- Buttons: G.hn pairing, Reset
Ethernet:
- Standard IEEE 802.3
- 10/100/1000 Mbps BaseT auto-sense
- Auto rate and duplex negotiation
- MDI/MDX support
G.hn :
- MaxLinear 88LX5152 + 88LX2720
- ITU-T G.9960 & G.9961 compliant
- G.hn 100MHz MIMO
- Up to 1000 Mbps at Phy rate
- NDIM support
Modulations:
- OFDM, FEC, Flexible frequency configuration
Management:
- HTTP Web-based (optional)
- TR-069 over IPv4/v6 dual stack
Security:
- AES 128 bits encryption ensures total data security
Networking Protocols
- 802.1D Ethernet Bridge
- 802.1Q VLAN
- Quality of Service (QoS)
- IGMP(IPv4) Snooping & MLD(IPv6) Snooping
Power
- 100-240 VAC, 50Hz/60Hz, 16A( for Outlet )
- Auto power saving mode max 0.5W (in standby mode)
Environment Condition:
- Operating temperature: 0 ~ 40 degrees Celsius
- Relative humidity: 8 ~ 95% (non-condensing)
Dimension:
- 140mm(H)x70 mm(W) x 36.5mm (without plug)(D)
Certification:
- FCC, cUL, CE, ITU-T G.hn Standard
Note: Specifications are subject to change without notice.
WARNING
- Disconnect the PLC from the power source before servicing For indoor user only
- Do NOT open the casing
- Do NOT use near water
- Do NOT insert sharp objects into the adapter’s socket Socket maximum output is 16A
支援文件
- MIMO Performance