PG-9172AC WiFi AC Powerline Ethernet Adapter

  • Overview

    Characteristics: Powerline Adapter with WiFi


    Bring next-generation wireless performance to your remote rooms via electrical wiring. Comtrend’s PG-9172AC is a powerline device with the added benefit of 802.11ac WiFi connectivity. Using existing electrical wiring and powerline technology, you can get WiFi connectivity to hard to reach locations without the weakened signal of a wireless extender. With advanced WiFi OptimizAIR 2.0 technology, the PG-9172AC delivers higher capacity and superior QoS for optimized video streaming. Easily add on to or create your Powerline Network—connect up to 16 Powerline Adapters (a minimum of two devices is required).

    PG-9172AC PG-9172AC PG-9172AC PG-9172AC PG-9172AC PG-9172AC



    Bring Superior Wireless Performance to Tough-to-Reach Locations Performs Better Than an Extender Extenders repeat an already weakened WiFi signal.

    Powerline adapters recreate the experience of a wired connection for better performance.




    • RJ-45 X 1 for Gigabit Ethernet Connection
    • LED: LAN, 2.4GHz, 5GHz, PLC,
    • POWER Button: WiFi On/Off, WPS, PLC Sync, PWR, RESET External WiFi Antenna x 2


    • Standard IEEE 802.3 10/100/1000Mbps
    • BaseT Auto-Sense Auto Rate and Duplex Negotiation
    • MDI/MDIX Support

    WLAN (WiFi):

    • Up to 1200Mbps by WiFi Transmission
    • WiFi OptimizAIR 2.0 (Higher Capacity & Superior QoS) 802.11 b/g/n @ 2.4GHz, 2T2R 802.11 a/n/ac @ 5GHz, 2T2R,
    • External FEM Concurrent 2.4GHz & 5GHz 11 Channels (US, Canada) WPA/WPA2/Mixed WAP2+WAP


    • OFDM, FEC, Flexible Frequency Configuration
    • BPSK/QPSK/16-QAM/64-QAM for WiFI


    • HTTP Web-based TR-069 Supported (Single Entity for & WiFi Functions)


    • AES 128 Bits Encryption Ensures Total Data Security
    • One Button Security Set-Up
    • Reset Button for Factory Reset

    Networking Protocols

    • 802.1D Ethernet Bridge 802.1Q VLAN
    • Quality of Service (QoS)
    • IGMP (IPv4) Snooping & MLD (IPv6) Snooping
    • Built-in dual TCP/IP stack (IPv4/IPv6)

    • ITU-T G.9960 & G.9961 Compliant
    • MIMO Support NDIM Support


    • 110-240 VAC 50Hz/60Hz

    Environment Condition

    • Operating temperature: 32~104F (0~40°C)
    • Relative Humidity: 8~95% (non-condensing)


    • 7.08 X 5.35 X 1.61in (H x W x D)
    • 180 x 136 x 41mm (H x W x D)


    • CE, FCC, HGF

    Note: Specifications are subject to change without notice.


    Product Sheet